ProTek35 Caddx Vista Polar Grey - DroneLabs.ca
ProTek35 Caddx Vista Polar Grey - DroneLabs.ca

DroneLabs.ca

ProTek35 Caddx Vista Polar Grey

$619.99
Sold out
Style:DJI 4S

** drone only, no controller/GoPro **

Changelog:

  • February 2021: Upgraded Prop Guards for more durability (Prop Guards V2.0, Material optimized)

  • April 2021: Upgraded Beast F7 45A V1.0 to V1.1 (Circuit design optimized, Updated to DPS310 Barometer)

  • Barometer can only be used with Betaflight 4.3.0 and above!

  • July 2021 : Beast F7 45A changed to Beast F7 55A

Features:

  • ProTek35 Prop Guards V2.0

  • No Props or frame in view!

  • High performance True-AIO Board Beast Whoop F7 AIO 55A  to save weight and space

  • T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)

  • Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)

  • Low Resonance frame construction (Less Jello, more Cinematic footage)

  • Caddx Polar Vista Digital HD System

  • Butter smooth 2203.5 3600KV (4S) / 2205 2300KV (6S)

  • Pre-tuned with smooth freestyle settings

PRE-TUNED & PRE-SETUP:

  • Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

  • To restore lost tunes or updates, please check our linked article on"Firmware/Factory Dumps"

  • Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

  • Please check our linked article on"How to disable Angle-Mode, activate Acro-Mode"

ProTek35 BNF Specs:

  • Board Beast Whoop F7 AIO 55A

  • Motor: XING 2203.5 3600KV (4S) / 2205 2300KV（6S）

  • Wheelbase: 151mm

  • Body Size: 118*94.5mmmm

  • Bottom plate thickness: 3.5mm

  • Top plate thickness: 2mm

  • Top and bottom plate spacing: 20mm (aluminum standoff height)

  • Propeller size: 3.5 inch

  • FC pattern: 25.5*25.5mm / 20*20mmmm

  • FPV cam spacing: 20mm

  • Weight: 348.3g (without battery)

ProTek35 HD Quad BNF Included Components and Parts

  • pre-built and tested Quadcopter

  • 1 x ProTek35 Frame

  • 1 x Caddx Polar Vista Digital HD System Kit 

  • 2 xAlbatross LHCP RP-SMA 5.8g antenna

  • 1 x TPU Bracket forNebula Nano Air Unit

  • 1 x TPU Antenna holder for DJI antenna

  • 2 x Nazgul 3535 propeller (Set of 4 - Color May Vary)

  • 1 x iFlight Lipo Strap 15*150mm (Color May Vary)

  • 1 x  iFlight Lipo Strap 15*250mm (Color May Vary)

  • 1 x GoPro TPU bottom stand black (GoPro Protector not included)

FC // Beast F7 AIO

Specification:

  • MCU: BGA-STM32F745

  • Gyro: BMI270

  • Blackbox: 16Mb Onboard Flash

  • BEC output: 5V 2.5A

  • Barometer: DPS310(Only Betaflight 4.3.0 and above)

  • Connector: Micro-USB

  • OSD: AT745E

  • FC Firmware：IFLIGHT_F745_AIO

  • Mounting pattern: 25.5*25.5mm φ3mm

  • Dimensions: 32.5*32.5mm

  • Weight: 8.5g

ESC // 55A 2-6S

Specification:

  • Uarts: 5

  • Current Sensor: Yes

  • Input: 2-6S LIPO

  • Current scale: 200

  • Constant: 55A / Burst: 60A

  • BLHeli: BLHeli-S

  • Telemetry: no

  • ESC Firmware:BlheliS G-H-30

  • Mounting pattern: 25.5*25.5mm/Φ3mm

  • Dimensions:32.5*32.5mm

Important

The DJI Remote Controller is recommended for beginners since you won't need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don't choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter and then bind to your own radio as usual.

  • Our current frsky receivers default version in 2.XX, requires to use the same version of frsky transmitter. 

  • If you have none frsky transmitter,please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.